Product description
2.1.3
Performance features
2-6
The FM 458-1 DP application module has been designed for high
dynamic performance closed-loop control and technological applications
in a SIMATIC S7-400 station. These control tasks can be freely
configured using CFC or optionally SFC. Furthermore, it offers a
PROFIBUS-DP connection.
Computational performance
64 bit RISC floating-point processor for arithmetic calculations
fastest cycle times of 0.1 ms – typical, 0.5 ms
32-bit controller for communication tasks
DRAM / SDRAM working memory
16 / 64 MB
12 MB / 60 MB useable for user program
the program code is loaded and expanded when initializing from
the memory module
data memory for this operating system, user program,
communications, message buffer, trace
SRAM (256 kB / 512 kB)
The externally buffered SRAM contains the following data, which
should be saved (non-volatile) even when the power fails:
fault diagnostics of the operating system ("exception buffer")
max. approx. 1000 / 2000 process quantities, configured using the
SAV function block
data, traced using the message system or trace function
(optional SRAM configuring)
Replaceable program memories (2, 4, or 8 MB)
MMC (Micro Memory Card), typical size: 2 MB
Two interfaces are available to load the user program into the
program memory:
via an MMC card slot (loading offline), e.g. field PG, USB prommer
directly from the PC via the MPI interface of a SIMATIC CPU
(loading online)
Application Module FM 458-1 DP - User Manual
A5E01078222-02
Edition 03.2009