Setting The Clock; Figure 3.36 Date/Time Setting Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.11 Setting Library Information
3.11.4

Setting the Clock

The following explains how to set the date and time for the LT270 S2.
If Time Zone is changed, the library needs to be rebooted. When the library cannot be rebooted, click the
[Back] button and cancel the setting. Then, make the settings again when the library can be rebooted.
Procedure
1
Click the [Date/Time] button displayed under [Setup] in the menu frame to display the date/
time setting window. If the date/time are already set, their values are displayed.

Figure 3.36 Date/time setting window

FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
118
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0