Cleaning Of The Door Tray; Defrosting; Out Of Operation; Moving - Smeg RCD50XZA Manual

4.2 Cleaning of door tray
• According to the direction arrow in the figure above, use both hands to squeeze the tray, and push it upward, then
you can take it out.
• After washing the tray having been taken out, you can adjust its installing height in accordance with your requirement.

4.3 Defrosting

The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed due to
change of season or temperature may also be manually removed by disconnection of the appliance from power supply or
by wiping with a dry towel.

4.4 Out of operation

• Power failure: In case of power failure, even if it is in summer foods inside the appliance can be kept for several
hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into
the appliance.
• Not in use: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.

4.5 Moving

• Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing
chamber drawers and etc. with tape, and tighten the levelling feet; close the doors and fix them with tape.
• During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during
movement shall be no more than 450
• At new destination, the refrigerator needs to stand in new location for 4 hours before turning on the powers supply.
The picture above is only for reference.
PAGE 13