GENERAL
4.
When installing any parts, be careful not to pinch or
damage any of the wiring harness.
Never throw relays, sensors or electrical parts, or ex-
5.
pose them to strong shock.
6.
The electronic parts used in the computer, relays, etc.
are readily damaged by heat. If there is a need for
service operations that may cause the temperature
to exceed 80 C (176 F), remove the electronic parts
before hand.
EAKE005T
7.
Loose connectors cause problems. Make sure that
the connectors are always securely fastened.
EAKE005U
GI -21
80˚C
(176˚F)
EAKE006A
EAKE006B