Kia RIO 2005 General Information Manual page 16

GI -16
2. Arrangement of parts
All disassembled parts should be carefully arranged
for effective reassembly.
Be sure to separate and correctly identify the parts to
be replaced from those that will be used again.
3. Cleaning parts for reuse
All parts to be used again should be carefully and
thoroughly cleaned by an appropriate method.
PARTS
When replacing parts, use KIA MOTORS genuine parts.
EAKE005D
REPLACEMENT
Standard values, such as torques and certain adjust-
ments, must be strictly observed in the reassembly of all
parts.
If removed, the following parts should always be replaced
with new ones.
1. Oil seals
2. Gaskets
3. O-rings
Lock washers
4.
5. Cotter pins (split pins)
EAKE005E
GENERAL INFORMATION
LAIF006A