Wireless Network Troubleshooting (For Hl-5370Dw); Wireless Setup Problems - Brother HL 5370DW Network User's Manual

Wireless network troubleshooting (For HL-5370DW)

Note
If you want to confirm the wireless network status, see For wireless network users (For HL-5370DW): on
page 172.

Wireless setup problems

The Brother print server is not found during setup by the Wireless Device Setup Wizard.
a
Make sure that the machine is powered on, is on-line and ready to print.
b
Move your Brother machine closer to your access point/router (or your computer for Ad-hoc) and try
again.
c
Reset the print server back to its factory default settings and try the wireless setup again (see Reset the
network settings to the factory default on page 118).
Why do I have to change my machine's network setting to "Wired LAN" during setup although I am
trying to setup Wireless LAN?
If you are using Windows
network using a network cable, it is recommended you temporarily connect the machine to your access
point/router, hub or router using a network cable. You will also need to change your machine's network setting
to wired LAN temporarily. Your machine's network setting will be changed to wireless LAN automatically
during the course of the setup.
®
For Windows :
Configuration in Infrastructure mode on page 29
Configuration using the automatic wireless (one-push) method on page 40
Configuration in Ad-hoc mode on page 46
For Macintosh:
Configuration in Infrastructure mode on page 61
Configuration using the automatic wireless (one-push) method on page 71
Configuration in Ad-hoc mode on page 77
®
2000 / Mac OS X 10.3.9 or greater, your computer is connected to the wireless
Troubleshooting
15
15
15
15
15
176