Embroidering Appliques (Using A Frame Pattern) - Brother PE-300S Operation Manual

Embroidering appliques (using a frame pattern)

You can use frame patterns with the same shape and size to sew appliques.
1. Select the frame shape to be embroidered and select the
" " stitch. Embroider onto the applique material. Remove
the fabric from the embroidery frame.
Cut neatly around the outside of the shape made by the
stitches.
2. Embroider a base fabric in the same way using the same frame
pattern shape and the stitch as in step 1.
* Do not change pattern size or position.
3. Apply a thin layer of fabric glue to the rear of the applique
material which is created in step 1, and then attach it to the
base fabric so that it follows the frame shape just stitched.
4. Without changing the frame shape or size, select the "
stitch, and use it to embroider the applique material onto the
project.
* Do not change size and sewing position.
1 Applique
"
Finished
1
applique on
the project
93