Brother NX-200 Operation Manual page 96

UTILITY STITCHES ——————————————————————————————————————————————————
3 Select stitch .
• For details, refer to "Selecting stitching"
(page 54).
With the right side of the fabric facing up, sew
4
along the right edge of the frayed section.
Turn the fabric around to sew the opposite
5
side.
Sew along the other edge of the frayed section
6
so that it looks like the previous stitching.
■ Drawnwork (Example 2)
1 Pull out several threads from two sections of
the fabric, separated by an unfrayed section of
about 4 mm (3/16 inch).
1 4 mm (3/16 inch)
90
N
N
1
Attach monogramming foot "N".
2
• For details, refer to "Replacing the presser
foot" (page 29).
3 Select stitch .
• For details, refer to "Selecting stitching"
(page 54).
Sew along the center of the unfrayed section.
4
N