Fagoting - Brother NX-200 Operation Manual

UTILITY STITCHES ——————————————————————————————————————————————————

Fagoting

Stitching across an open seam is called "fagoting". It
is used on blouses and children's clothing. This stitch
is more decorative when thicker thread is used.
Use an iron to fold the two pieces of fabric
1
along their seams.
2 Baste the two pieces of fabric, separated by
about 4 mm (3/16 inch), onto thin paper or a
sheet of water-soluble stabilizer.
3
1 Thin paper or water soluble stabilizer
2 Basting stitching
3 4 mm (3/16 inch)
3 Attach zigzag foot "J".
• For details, refer to "Replacing the presser
foot" (page 29).
4 Select stitch or
• For details, refer to "Selecting stitching"
(page 54).
5 Set the stitch width to 7.0 mm (1/4 inch).
• For details, refer to "Adjusting the stitch
width" (page 45).
86
1
2
J
.
6 Sew with the center of the presser foot
aligned along the center of the two pieces of
fabric.
7 After sewing is finished, remove the paper.