Brother NX-200 Operation Manual page 54

SEWING BASICS ———————————————————————————————————————————————————
3 Position the fabric under the presser foot, and
then press (start/stop button) once.
1
1 Start/stop button
After reverse/reinforcement stitches are
sewn, the machine starts sewing.
4 After reaching the end of the stitching, press
(reverse/reinforcement stitch button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
1
1 Reverse/reinforcement stitch button
48
After reverse/reinforcement stitches are
sewn, the sewing machine stops.
Memo
● Reverse/reinforcement stitches will not be
sewn if the start/stop button is pressed at the
end of the stitching. Be sure to press the
reverse/reinforcement stitch button at the
end of the stitching.