Removing The Embroidery Unit; Replacing The Bobbin Case - Brother Innov-ís 1000 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Removing the embroidery unit

Make sure that the sewing machine is completely
stopped and follow the instructions below.
a Remove the embroidery frame.
• For details on removing the embroidery
frame, refer to "Removing the embroidery
frame" (page 144).
b Press , and then press
The embroidery carriage moves into a
position where it can be stored.
c Turn off the sewing machine.
CAUTION
● Always turn off the sewing machine
before removing the embroidery unit.
It may cause malfunctions if removed
when the machine is turned on.
138
d
.
● Do not carry the embroidery unit by
holding the release button compartment.

Replacing the bobbin case

Use embroidery bobbin thread intended for use with
this machine (page 9).
When using other kinds of embroidery bobbin
thread, use the optional alternate bobbin case (pink
marking). (The bobbin case originally installed in the
machine has a green marking.) For details on how to
remove the bobbin case, refer to "Cleaning the race"
(page 164).
Hold the release button on the bottom left of
the embroidery unit, and slowly pull the
embroidery unit to the left.
a
a Release button
The embroidery unit separates from the
sewing machine.
CAUTION