Brother Innov-ís 1000 Operation Manual page 166

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
a Bobbin case
f Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and its
surrounding area.
a Cleaning brush
b Race
• Do not apply oil to the
g Insert the bobbin case so that the projection
on the bobbin case aligns with the spring.
a Projection
b Spring
a Bobbin case
a
a
b
bobbin case
a
b
b
a
a
h Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover back
on.
a Needle plate cover
CAUTION
● Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XC3153-051 (green
marking), XC8167-151(pink marking)),
contact your nearest authorized service
center.
● Be sure that the bobbin case is correctly
.
installed, otherwise the needle may break.
a
Care and Maintenance 165
5