Table of Contents
Advertisement
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
STOPPING AND CONTINUING EMBROIDERING
If the thread breaks or the cartridge runs out of thread, stop embroidering, fix the thread, and then go
back to the point in the pattern where sewing stopped.
If the thread cartridge ran out of thread:
Get a new thread cartridge.
If the thread broke:
Pull the thread out of the cartridge. For details on pulling the thread out from the cartridge, see the
section Pulling the thread end out of the cartridge on page 45.
1
Press the
After sewing a few stitches, the machine stops, and
a screen like the one shown at the right appears.
1 The highlighted number is the number of the thread
color that was being embroidered.
2
Press the thread cartridge release button (
thread cartridge.
3
Press the
A screen like the one shown at the right appears.
1 Total number of thread colors used in the pattern
2 Number indicating the order of the thread color being
embroidered
3 The part of the pattern that is being embroidered
4 Press the
5 Press the
6 Press the
7 Press the
Key information
•
Holding down the
•
Holding down the
colors.
NOTE
•
If the number at 2 is highlighted, embroidering for that thread color was stopped. If
stitching is moved back to the beginning for that thread color or if another thread color
is selected, the highlighting at 2 disappears.
key to stop embroidering.
key.
key to go back 11 stitches.
key to skip ahead 11 stitches.
key to skip ahead one thread color. (The number at 5 increases by 1.)
key to go back one thread color. (The number at 6 decreases by 1.)
or
key moves forward or backward 31 stitches.
or
key moves forward or backward through the thread
STOPPING AND CONTINUING EMBROIDERING
), and then remove the
4
5
1
6
2
3
7
1
41
Advertisement
Table of Contents
