Table of Contents
Advertisement
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
PULLING THE THREAD END OUT OF THE CARTRIDGE
If the thread breaks or is not feeding out of the cartridge, the embroidery will not be sewn correctly.
Follow the steps below to pull the end of the thread out from the cartridge.
Put the needle guard cap over the needle.
1
1 Needle guard cap
Swing open the cover
2
of the thread
cartridge.
CAUTION
•
Do not open the cover too far. Also, do not open it with excess force, otherwise the thread
cartridge may break.
Use a thin object to depress the thread
3
release button. Now, pull out about 6"
(15 cm) of thread.
1 Thread release button
PULLING THE THREAD END OUT OF THE CARTRIDGE
1
1
45
Advertisement
Table of Contents
