Brother CS-8060 Operation Manual page 45

Raise the presser foot lever.
3
1 Presser foot lever
The presser foot is raised.
With a screwdriver, loosen the presser foot
4
holder screw, and then remove the walking
foot.
1 Presser foot holder screw
5 Attach the presser foot holder.
• For details, refer to "Removing the presser
foot holder" (page 37).
Memo
● Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to "Stitch Settings" (page 96).
1
1
Replacing the Presser Foot 39