Technical Specifications - Chicco 8058664036585 Instructions For Use Manual

insertion polarity as indicated in the
battery compartment.
Reposition the Alkaline battery com-
partment closing panel (10) first in-
serting the lower panel hooks in their
battery compartment housing and
gently pushing the panel downward
(fig.2).
3.2 Installing or replacing the lith-
ium-ion battery supplied with the
parent unit
Upon purchase, the 3.7 V 1800mAh
rechargeable lithium-ion battery (13)
in the parent unit is kept separately in
the product packaging.
Carefully remove the lithium-ion bat-
tery from its packaging.
Remove the rechargeable battery
compartment closing panel (10), plac-
ing your finger near the top groove
and gently pulling the panel outward
(fig.5).
Insert the lithium-ion battery (13), re-
specting the proper insertion polarity
as indicated in the battery compart-
ment.
Reposition the rechargeable battery
compartment closing panel (13), first
inserting the lower panel hooks in
their battery compartment housing
and gently pushing the panel toward
the product (fig.6).
If the duration of the rechargeable
lithium-ion battery is reduced exces-
sively, this means that it has run out
and therefore must be replaced (this
is to be considered normal because
rechargeable batteries run out over
time).
Remove the run out rechargeable bat-
tery (13) and replace with another
rechargeable battery that is identical
to the 3.7V 1800mAh supplied with
the product (code20256600100 to
be requested directly from Artsana
S.p.A.) taking care to place them with
the correct insertion polarity indicated
on the battery compartment.

TECHNICAL SPECIFICATIONS

- Visual and voice transmission via
"Adaptive frequency Hopping" digital
technology system.
- Outdoor operating range of about
150 metres without obstacles.*
* The maximum operating range is
about 150 metres in an open field with
no obstacles and with fully charged
batteries (the range, however, could
be reduced substantially within a
home, depending on particular en-
vironmental conditions, layout of
walls and furniture in the home and
the presence of metallic structures,
external and internal interference/
electromagnetic fields, concrete walls
or between rooms on different floors
or because batteries are not fully
charged, etc.).
Baby unit
Power:
Internal: FOUR 1.5V AA/LR6 ALKA-
LINE BATTERIES
External: via 100-240V~ 50/60Hz
/6.5V
ing adapter
Transmission:
- Transmission frequency band: 2400-
2483.5MHz
- Signal strength: 100mW max
LED infrared radiation: emissions be-
low LEA Class 1, standard EN 60825-1
Parent unit
Power:
Internal: 3.7V 1800mAh LITHIUM-
23
550mA mains switch-