Chicco 8058664036585 Instructions For Use Manual page 20

Medium charging level on re-
chargeable battery
Low charging level on recharge-
able battery
Rechargeable battery flat: the
parent unit will switch off with-
in a few minutes
2. Description of features
2.1 Baby unit
When power is supplied with mains
adapter (1):
- insert the mains adapter jack (1) in
the power connector (11) on the side
of the unit.
- insert the mains adapter plug in an
easily accessible power socket.
CAUTION:
Periodically inspect mains adapters
(1). If the power cord or plastic parts
show signs of damage, do not use
them and contact a qualified techni-
cian.
Do not leave mains adapters (1)
plugged into the outlet when devices
are not in use and/or not connected to
the mains adapters (1).
2.1.2 Modes of use - Switching on and
Adjustment
The Baby unit must be positioned
about 1 - 1.5 metres from the child, on
a flat, stable surface and with the mi-
crophone (5) and the camera lens (5)
directed toward the child.
Attention: the Baby unit, mains
adapter (1) and its power cord must be
kept out of reach of children.
Switching the Baby unit on/off
Press the on/off button (2) for about 2
second. The Baby unit will switch on.
The power and link indicator light (9)
will begin to flash green to indicate
that the Baby unit is searching for a
connection to start audio transmis-
sion with the parent unit. Once con-
nection has been established between
the 2 units, the power and link indica-
tor light will light up steady green.
Keep the button (2) pressed for 2 sec-
onds. The power and link indicator (9)
and the Baby unit will switch off.
Nightlight
A night light (4) is present on the Baby
unit.
The nightlight can be set with a dual
function: nightlight at minimum in-
tensity and steady to reassure the
baby while he sleeps, and a nightlight
with high intensity, variable light to
accompany him while he falls asleep.
Night Vision
2.2 Parent unit
In the event of power with mains
adapter (1) or rechargeable lithium-
ion battery charging:
- insert the mains adapter jack (1) in
the power connector (14) on the side
of the unit.
- insert the mains adapter plug in an
easily accessible power socket.
Caution:
- Periodically inspect mains adapters
(1). If the power cord or plastic parts
show signs of damage, do not use
them and contact a qualified techni-
cian.
- Do not leave mains adapters (1)
plugged into the outlet when devices
20