Load Paper In The Paper Tray - Brother HL-8050N Quick Setup Manual

2

Load Paper in the Paper Tray

1
Pull the paper tray out of the printer.
Paper tray
The paper tray must be pulled out
completely. If the paper tray is pulled out
halfway and pushed in again, the paper may
be damaged.
2
Place the paper tray on a flat surface.
3
Remove the lid of the tray.
4
If the base plate of the paper tray is raised,
push it down.
5
Squeeze the length guide and slide it to fit
the paper size.
Length guide
6
Squeeze the right width guide and slide it to
fit the paper size.
7
Load the paper with the side to be printed
facing up and with all 4 corners aligned.
Base plate
Right width guide
Do not load paper exceeding the
maximum fill line or the maximum
capacity allowed.
Align the right width guide with the paper
width correctly. If the right width guide is not
in place, the paper will not be properly fed
and may cause a paper jam.
13