Manual Feed Slot - Brother HL-660 Series User Manual

English
USER'S GUIDE

MANUAL FEED SLOT

2–8
The multi-purpose sheet feeder also has a manual feed slot. You can
manually load paper sheet by sheet into this slot. You do not need to
remove paper from the multi-purpose sheet feeder when using the manual
feed slot.
When you use labels or transparencies, be sure to use this slot. For
information on paper specifications, see "PAPER SPECIFICATIONS" in
the previous section.
Load paper manually as follows:
1. Make sure that you have selected the manual paper feed, paper size
and orientation in your software application.
Note
You may be able to select manual paper feed, paper size, and
orientation in your application software. If your application software
does not allow these settings, you should choose them by using the
RPC program on a disk supplied with your printer.
If you do not select manual paper feed and insert a page in the manual
feed slot, the printer loads the first page from the manual feed slot and
loads the subsequent pages from the multi-purpose sheet feeder.
If your application software does not support your custom paper size,
select the next paper size up that is closest but larger than the custom
size. Then adjust the print area by the changing the right and left
margins in your application software.
2. Choose a print command to send a file or document to the printer.
If the printer is in sleep mode, receiving data awaken it.
A blinking MANUAL lamp alerts you to insert a sheet of paper into
the manual paper feed slot.