Load Cell Characteristic Value; Modbus Rtu Response Delay (Only For Sg-Shield Oem) - Siemens SIMATIC IOT2000 SG-Shield Operating Instructions Manual

Parameter assignment

6.10 MODBUS RTU response delay (only for SG-Shield OEM)

6.9

Load cell characteristic value

The load cell characteristic value has no effect on the calculation of the measured value. The
exact value can be entered if the measurement log for the load cell is available. The mean value
can be entered if there is more than one load cell.
Example
Characteristic value = 2.018 mV/V
6.10 MODBUS RTU response delay (only for SG-Shield OEM)
This parameter defines the delay of a response to a data request by the MODBUS RTU master (in
ms).
24
SIMATIC IOT2000 SG-Shield
Operating Instructions, 08/2021, A5E50985404-AA