Siemens SIMATIC IOT2000 SG-Shield Operating Instructions Manual page 14

Installing/mounting
4.1 Installing the SIMATIC IOT2000 SG-Shield
5. Notice! Do not bend contact pins.
Insert the contact pins of the SIMATIC IOT2000 SG-Shield so that they fit perfectly into the
socket contacts of the main circuit board.
6. Fasten the cover.
Snap in the left side of the cover into place and press on the right side of the cover until it
latches into place on the housing.
Figure 4-1
14
Installed SIMATIC IOT2000 SG-Shield
SIMATIC IOT2000 SG-Shield
Operating Instructions, 08/2021, A5E50985404-AA