National Instruments MXI Getting Started page 39

Appendix A Default Settings
PCI-Based MXI-2 Interfaces for Windows 2000/NT/Me/98
Table A-8. VXI-MXI-2/B Hardware Default Settings (Continued)
Hardware Component
MXIbus termination
(U21 switches 3 and 4)
Configuration EEPROM
(U21 switches 1 and 2)
Table A-9. VME-MXI-2 Hardware Default Settings
Hardware Component
A16 base address (U20)
VME-MXI-2 intermodule signaling
(W2)
MXIbus termination
(U21 switches 3 and 4)
Configuration EEPROM
(U21 switches 1 and 2)
DRAM SIMMs installed
SIMM size configuration (S2)
A-6
Default Setting
Automatic MXIbus
termination: switch 3 set to
OFF; switch 4 ignored
User-modifiable; factory
settings protected: both
switches set to OFF
Default Setting
Hex C040
No user-defined pin selected
Automatic MXIbus
termination: switch 3 OFF;
switch 4 ignored
User-modifiable; factory
settings protected: both
switches OFF
Per customer order
OFF if SIMMS are 4 M × 32
or larger; ON if smaller than
4 M × 32
ni.com