Brother MFC-9660 Quick Setup Manual page 3

Step 4.
Connect the MFC to your PC with Parallel Cable.
A.
Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips.
B.
Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your
computer's parallel printer port, see the User's Guide for your computer.
Step 5.
Turn on the MFC by plugging in the power cord.
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
( For Windows ® 95/98/98SE/Me Users )
1.
In the Connect Cable window,
click Next.
3.
Click Yes to have the Control
Centre loaded each time
Windows ® is started. The
Control Centre will appear as
an icon in the task tray. If you
click No the Scan keys on the
MFC will be disabled. Please
see Note *3.
Step 4.
Turn on the MFC by plugging in the power cord.
Step 5.
Connect the MFC to your PC with the USB cable (it will
take a few seconds for the installation screen to appear).
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
( For Windows
1.
In the Add Printer Wizard
window, select BRUSB:
USB Printer Port, and then
click Next.
4.
If the test page is printed
correctly, click Yes.
If you click No, follow the
prompts on the screen to
correct the problem.
2.
When the above screen
appears, click Finish and wait
as the PC restarts Windows ®
and continues the installation.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
®
98/98SE/Me Users )
2.
Accept the default Printer
name by selecting Yes, and
then click Next.
5.
Select Yes to restart your
computer, and then click
Finish.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
– 3 –
®
( For Windows 2000 Professional User )
1.
In the Connect Cable window,
click Next.
3.
When the Digital Signature
Not Found dialog boxes
appear, click Yes to install the
driver.
3.
Select Yes (recommended),
and then click Finish. A test
page will be printed so you
can check the print quality.
6.
Click Yes to have the Control
Centre loaded each time
Windows ® is started. The
Control Centre will appear as
an icon in the task tray. If you
click No the Scan keys on
the MFC will be disabled.
Please see Note *3.
2.
When the above screen
appears, Click Finish and wait
as the PC restarts Windows ®
and continues the installation.
4.
Click Yes to have the Control
Centre loaded each time
Windows ® is started. The Control
Centre will appear as an icon in
the task tray. If you click No the
Scan keys on the MFC will be
disabled. Please see Note *3.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
( For Windows ® 2000 Users )
1.
When the Digital Signature Not
Found dialog boxes appear, click
Yes to install the driver.
2.
Select Finish to restart your
computer.
3.
Click Yes to have the Control
Centre loaded each time
Windows ® is started. The Control
Centre will appear as an icon in
the task tray. If you click No the
Scan keys on the MFC will be
disabled. Please see Note *3.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.