Table of Contents
Advertisement
Press Redial/Pause for each 3.5 second delay, as needed.
Note
5
Press Stop to exit.
You cannot change a Paging number or PIN remotely.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location, using Fax Forwarding, Paging, or Remote Retrieval functions.
The LCD will indicate when you have a fax stored in memory.
1
Press Function, 1, 7, 2. The LCD
prompts you to choose a fax LCD.
2
Press
or
and press Set.
3
Press Stop to exit.
If there are faxes in memory when you
turn the Fax Storage OFF, the LCD
prompts you to erase any faxes in
memory.
If you press 1, all fax data is erased and Fax Storage is turned off. If you press
2, data is not erased, and Fax Storage remains on.
(See
Printing a Fax in Memory
Changing Remote Retrieval Access Code
Enter your Remote Retrieval Access Code when the MFC picks up your call, so
you can access features remotely. The access code is preset to 1 5 9
can change this. (See
1
Press Function, 1, 7, 3.
2
Enter a three-digit number from 000 to 999 and press Set. The " " cannot be
changed. (Do not use the same digits that appear in your Fax Receive Code.)
3
Press Stop to exit.
R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X )
to select ON (or OFF)
, page 5-4.)
Operation from Extension Telephone
FAX STORAGE:OFF?
SELECT
ERASE ALL FAX?
1.YES 2.NO
, page 5-4.)
& SET
, but you
8 - 2
Advertisement
Table of Contents
