Mounting The Cutting Attachment - Stihl FS 55 Instruction Manual

English
WARNING
Deflector (1) is approved for mowing heads only
and must therefore be mounted before fitting a
mowing head
WARNING
Deflector (2) is approved for grass cutting blades
only and must therefore be mounted before fit‐
ting a grass cutting blade.
7.2 Mounting the deflector
Deflectors (1) and (2) are both mounted to the
gearbox in the same way.
► Position the deflector against the gearbox so
that the lug (3) engages the recess (4) in the
deflector.
► Insert the screw (5) and tighten it down firmly.
On some versions the M5x14 screw is packed
loose with the deflector.
16
2

8 Mounting the Cutting Attachment

8 Mounting the Cutting
Attachment
8.1 Placing power tool on the
ground
► Shut off the engine.
► Lay your power tool on its back so that the cut‐
ting attachment mounting face is pointing up.
8.2 Mounting Hardware for Cutting
Attachments
The mounting hardware supplied depends on the
cutting attachment that comes as original equip‐
ment with the new machine.
8.2.1 Machine supplied with mounting hard‐
ware
Mowing heads and metal cutting attachments
may be mounted.
3
4
5
1
2
0458-233-8321-G