English
3.5
Shoulder straps
18 Shoulder strap can be used
19 Shoulder strap must be used
20 Full harness can be used
4
Mounting the Bike Handle
4.1
Mounting the Handlebar
6
4
1
► Position the clamp (1) and handlebar sup‐
port (2) on the shaft (3)
► Place the handlebar (4) in the handlebar sup‐
port – the rubber handle (5) must be on the left
(viewing direction from engine to handlebar)
► Place the clamp (6) on the handlebar support
► Insert the screws (7) through the holes in the
parts and screw them into the clamp (6) as far
as they will go
12
5
7
2
3
► Fasten the handlebar (4) at a distance (A) of
approx. 15 cm (6 in) ahead of the engine
housing on the shaft (3)
► Line up the handlebar and tighten down the
screws firmly
4.2
Mounting the Control Handle
10
8
9
4 Mounting the Bike Handle
A
4
3
11
12
4
12
0458-233-8321-G