Setting Your Station Id - Brother MFC-8670DN Quick Start Manual

7

Setting your Station ID

You should store your name and fax number to be printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on
the dial pad, and then press OK.
03.Station ID
Fax:_
Enter & OK Key
5
Enter your telephone number (up to 20
digits) on the dial pad, and then press OK.
(If your telephone number and fax number
are the same, enter the same number
again.)
03.Station ID
Fax:908XXXXXXXX
Tel:_
Enter & OK Key
6
Use the dial pad to enter your name (up to
20 characters), and then press OK.
03.Station ID
Fax:908XXXXXXXX
Tel:908XXXXXXXX
Name:_
Enter & OK Key
■ Refer to the following chart for entering
your name.
■ If you need to enter a character that is on
the same key as the previous character,
press to move the cursor to the right.
■ If you entered a letter incorrectly and want
to change it, press
under the incorrect character, press
Clear/Back.
to move the cursor
Press One Two
key time times
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
For more details, see "Entering Text" in
Chapter D of the User's Guide.
7
Press Stop/Exit.
NOTICE (For USA)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer
or electronic device to send any message via a
telephone fax machine unless such messages
clearly contain, in a margin at the top or bottom of
each transmitted page, or on the first page of the
transmission, the date and time it is sent and an
identification of the business or other entity or other
individual sending the message and the telephone
number of the sending machine or such business,
other entity or individual.
To program this information into your machine, see
Setting the Date and Time on page 8 and Setting
your Station ID on page 9.
Three Four
times times
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
9