Brother MFC-8670DN Quick Start Manual page 27

7 If you still have trouble with your network
connection, click the Add button.
8 To add port 137 for both network
scanning and Network PC-Fax receiving,
enter the information below:
1) In Description of service: - Enter any
description, for example "Brother
PC-Fax Receiving".
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter "Localhost".
3) In External Port Number for this
service: - Enter "137".
4) In Internal Port number for this
service: - Enter "137".
5) Make sure UDP is selected.
6) Click OK.
9 Make sure if the new settings are added
and are checked, and then click OK.
®
■ Windows Vista
users:
1 Click the Start button, Control Panel,
Network and Internet, Windows
Firewall and click change settings.
2 When the User Account Control screen
appears, do the following.
■ For Users who have administrator
rights: Click Continue.
■ Users who do not have administrator
rights: Enter the administrator
password and click OK.
3 Make sure that Windows Firewall on the
General tab is set to On.
4 Click the Exceptions tab.
5 Click the Add port... button.
6 To add port 54925 for network scanning,
enter the information below:
1) In Name: Enter any description, for
example "Brother Scanner".
2) In Port number: Enter "54925".
3) Make sure UDP is selected.
Then, click OK.
1
2
3
7 Click the Add port... button.
8 To add port 54926 for Network PC-Fax,
enter the information below:
1) In Name: Enter any description, for
example "Brother PC-Fax".
2) In Port number: Enter "54926".
3) Make sure UDP is selected.
Then, click OK.
9 Make sure that the new setting is added
and is checked, and then click OK.
Continued ...
25