Antistatic Connection - Milwaukee HEAVY DUTY AS-30 MAC Original Instructions Manual

Turn
Turn I
Turn I+
Turn
Turn
The hose diameter and the setting for suction hose diameter must be
the same.
ø21
ø27
ø32
ø36
ø38
CAUTION!
The appliance socket is designed for electrical auxiliary equipment; see
technical data for reference.
•
the appliance that is to be connected.
• Read the operating instructions to the appliance to be connected and
observe the safety notes contained in these.
An appliance socket with earthing contact is integrated in the machine.
An external power tool can be connected there. The socket features
permanent power on, when the electrical switch is in position
the machine can be used as an extension cord.
In position
power tool connected. Dirt is picked up from the source of dust
immediately. To comply with regulations, only approved dust producing
tools should be connected.
The maximum power consumption of the connected electrical appliance
If the maximum power rating for the socket is exceeded, an internal
Before turning the switch to position
24
Turn on machine with
function
Turn on machine without
function
Activates outlet with
function with automatic
Activates outlet with
+
function without automatic
ø21
ø27
ø32
ø36
ø38
ensure that the tool
Auto-Clear
Auto-Clear. A frequent cleaning cycle will automatically run during
operation to ensure that suction performance is always at its best.
If suction performance decreases or in extensive dust applications a
•
• Close the nozzles or suction hose opening with the palm of your
hand.
•
speed for approx. 10 seconds with the suction hose opening closed.
and operating of the machine.
Flow rate warning
CAUTION!
The machine is equipped with a system to monitor air velocity and Dust
When the motor is running, hold the suction hose shut to reduce the
second. The acoustic warning sounds after some additional seconds.
Set the diameter setting to the actual hose size.
When LED indicator lights, air velocity is below 20 m/s.
•
•

Antistatic connection

CAUTION
The machine is equipped with an antistatic system to discharge any
static electricity that may develop during dust pick-up.
The antistatic system is placed in front part of the motor top and creates
proper function the use of an electrical conductive or antistatic suction
hose is recommended. When inserting the optional disposal bag make
, i.e.
sure the antistatic connection is maintained.
To protect the electronics and motor, the machine is equipped with a
cartridge to prevent dust from settling inside the air channels and motor.
Contact your local sales representative.
CAUTION!
. Before picking up dust with occupational
*)
Starting