TECHNICAL DATA DUST EXTRACTION Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user. Proper use also includes Volts 230-240V Mains frequency 50 Hz...
Only use original spare parts and accessories from MILWAUKEE ® openings or use with opening blocked. Keep openings free of dust, lint, Description Order No. 4932 4596 87 Do not use in outside areas at low temperature. 4932 459689 Outdoor use of the appliance must be limited to occasional use.
Auto-Clear Turn Turn I Turn on machine with Auto-Clear. A frequent cleaning cycle will automatically run during operation to ensure that suction performance is always at its best. function Turn on machine without If suction performance decreases or in extensive dust applications a Turn I+ function •...
CAUTION! Before being taken out of the hazardous zone, the device must be The machine is equipped with a water level limit system which shuts decontaminated using a dust extraction method, wiped clean, or sealed. All parts of the device must be regarded as contaminated if they are removed from the hazardous zone and suitable measures must be taken to prevent dust from spreading.
Page 26
> 0.1 mg/m³ as well technician. as saw dust. At least once a year, a MILWAUKEE technician or an instructed ® Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.
Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...