Auto Cut Function - Brother P-TOUCH 1900 User Manual

h
Press
4
r
Press
5
The Auto cut function allows you to set whether or not the machine will automatically cut
each label after it is printed. Turn on the Auto cut function before starting to print in order to
cut the labels automatically after printing them.

After printing a label with the Auto cut function set to OFF, hold down c and press
_ once to feed the tape, then cut it.
To turn the Auto cut function on or off:
While holding down c, press Z once, and keep c held down to display the
1
current auto cut setting.
While still holding down c, continue pressing Z until the desired auto cut setting
2
is displayed.
Release c to apply the selected auto cut setting.
3
EXAMPLE
To turn the Auto cut function on:
While holding down
1
and keep
until 5.0 inch is displayed.
.

AUTO CUT FUNCTION

c
, press
c
held down.
Z
once,
41