Auto Cut Function - Brother P-touch 2400 User Manual

The Auto cut function allows you to set whether or not the machine will automatically cut off
each label after it is printed. Turn on the Auto cut function before starting to print in order to
cut off the labels automatically after printing them.
After printing a label with the Auto cut function set to OFF, hold down
Feed&Cut
once to feed the tape and cut it.
Space
When a setting other than FULL is selected, extra tape is fed out before printing starts.
The extra tape is cut off if the Auto cut function is set to ON so that the margins on each
side of the text are equal.
To turn on or off the Auto cut function:
1 While holding down
current auto cut setting.
2 While still holding down
is displayed.
3 Release
Code
EXAMPLE
To turn on the Auto cut function:
1
While holding down
once, and keep
2
While still holding down
tinue pressing
played.
3
Release

AUTO CUT FUNCTION

, press
Code
, continue pressing
Code
to apply the selected auto cut setting.
Code
Code
A.Cut
until ON is dis-
X
.
Code
A.Cut
once, and keep
X
A.Cut
A.Cut
, press
X
held down.
Caps
, con-
Code
Caps
held down to display the
Code
until the desired auto cut setting
X
Alt A U T O C U T
O F F
A U T O C U T
Alt
O N
and press
Code
Length Length
ABC / ABC
A / F
Width
Length Length
ABC / ABC
A / F
Width
89