Front Panel Service Codes - Tektronix Phaser 140 Instruction Sheet

Phaser 140 Service Supplement

Front panel service codes

Defective printers often report service error codes on the front panel display.
The format for these codes is:
service call: xx
where xx indicates a two-digit error code. Refer to the following table for
explanations of these codes. The Canon BJC-600 service manual referred to in
the table is Canon part number QY8-1334-000. The page numbers in the table
refer to Rev. 0 of the manual (dated 1993).
Service call error codes
Code Description
01 LF error.
02 Abnormal temperature.
04 Carriage error.
08 Waste ink tank full.
10 Cleaning unit error.
20 Home position error.
40 Printhead error.
11 Reserved.
12 ASF sensor error.
14 Encoder error.
18 GA error.
90 EEPROM error.
A0 RAM error.
C0 ROM error.
Action (per Canon BJC-600 Service Manual Rev. 0)
See Canon service manual page 4-20; paper fed
incorrectly.
See Canon service manual page 4-24; temperature on
Carriage Board >70°C < -30°C.
See Canon service manual page 4-12; carriage speed
or position incorrect.
See Canon service manual page 4-16; waste ink
counter > 300 g.
Not in Canon service manual .
See Canon service manual page 4-12; carriage move to
home.
See Canon service manual page 4-18; check printhead.
NA
See Canon service manual page 4-15; check pick roller
rotation.
See Canon service manual page 4-12; carriage
movement.
See Canon service manual page 4-3; replace Print
Engine Control Board.
See Canon service manual page 4-3; replace Print
Engine Control Board.
See Canon service manual page 4-3; replace Print
Engine Control Board.
See Canon service manual page 4-3; replace Print
Engine Control Board.
10