Before You Begin - Razor FLASHBACK Owner's Manual

BEFORE YOU BEGIN

Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents that may have occurred during shipping. Because
your scooter was partially assembled and packed at the factory, there should not be any problems, even if the box
has a few scars or dents.
Rear/Right Brake Lever
Front/Left Brake Lever
Front Wheel
Required Tools
5 mm Allen Wrench
(Included)
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Handlebars
Collar Clamp
Deck
1.
Two (2) 13/16 mm Wrenches
(Included)
Rear Wheel
8/10 mm Wrench
(Included)
2
WARNING:
DO NOT USE NON-RAZOR PARTS
WITH YOUR SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on the
basis of its compatibility with the
frame and all other parts. Certain
aftermarket components may not
be compatible. Use of non-Razor
parts will void the warranty.
Product ID Locations:
(See locations to the left)
1. Side of Deck Frame
2. UPC Side of Box (Not Shown)
Box Contents:
• Flashback Scooter
• Owner's Manual
• Allen Wrench
• Two (2) 13/16 mm Wrenches
• 8/10 mm Wrench