Pre-Ride Checklist - Razor FLASHBACK Owner's Manual

ASSEMBLY AND SET-UP
Inflating the Tires
The tires are inflated when shipped, but they invariably may lose some pressure between the point of manufacturing
and your purchase. Always inflate the tires to the correct PSI before first time use.
Lower air pressure can result in a shorter ride time.
Periodically check tires. Reinflate when needed.
1
Using a bicycle-style tire pump equipped for a Schrader-type valve, inflate
the tires to the correct PSI indicated on the sidewall of the tires.

PRE-RIDE CHECKLIST

Brakes
Check the brakes for proper function. When you squeeze
the brake levers, the brakes should provide positive
braking action.
Tires
Periodically inspect the tires for excess wear and regularly
check the tire pressure. Reinflate as necessary.
Loose Parts/Tire Care
Check and secure all fasteners before every ride. Make sure
the collar clamp is locked properly in place before riding.
Inspect tires for signs of wear or damage. Measure and
adjust the PSI of the tires accordingly. Do not exceed 35 PSI.
Safety Gear
Always wear proper protective equipment, such as an
approved safety helmet, elbow pads and kneepads. Always
wear shoes (lace-up with rubber soles) and keep shoelaces
tied and out of the way of the wheels. Never ride barefooted
or in sandals.
Be Careful!
You will see people on TV and maybe even people you
know doing tricks and stunts. These are people who have
been practicing on scooters for a very long time. Don't try
something until you are ready. Avoid steep inclines and don't
ride too fast — you can lose control and fall. Skateboard
parks are not designed for scooters. Never ride in traffic or
on the street and watch your surroundings for pedestrians,
bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken
frames are rare, it is possible for an aggressive rider to
run into a curb or object and wreck and bend or break a
frame. Get in the habit of inspecting your scooter on a
regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts,
cables, fasteners, etc., to ensure they are secure and
assembled correctly. There should not be any unusual
rattles or sounds from loose parts or broken components.
If the product is damaged, do not ride. Reference "Safety
Warnings" on page 1 of this manual.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies
necessarily provide coverage for scooter use.
Check with your insurance company for information
regarding insurance.
5
WARNING: Do not use
the scooter for the first time until
you have inflated the tires to the
correct PSI. Failure to do so may
damage your electric scooter and
void your warranty.
WARNING: Do not
overinflate, as this could damage
the tires or wheels.
Note: The pressure air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your scooter tires, first make sure
the pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
overinflate the tires, release the
excess pressure immediately.