Clearing Sound Pad Effect Functions; Recording Sounds And Assigning Them To Sound Pads - Tascam Mixcast 4 Reference Manual

8. On the Pad Settings page, set the pad color as desired. Then, tap the
Home icon at the top right to return to the Home Screen
Effect
Sound Pad Screen PAD Settings page
9. On the Home Screen, press Sound Pad (w) button 1.
The effect will be applied to the mic input while the button is being
pressed
Effect
Home Screen

Clearing Sound Pad effect functions

Use the following procedures to clear effect functions assigned to Sound
Pads.
As an example, here we explain the procedure to remove an effect func-
tion assigned to Bank 1.
1. Open the PAD Settings page of the Sound Pad Screen and activate
Bank 1.
Applause Alarm
Drumbeat Heartbeat
Sound Pad Screen PAD Settings page
2. Open the Bank 1 screen and tap Pad 1.
Effect
Effect
Sound Pad Screen PAD Settings page
o "Effect" is shown in the audio source file name field.
o Tap the garbage icon to clear the assigned effect function.
AirHorn Brass
Bleep Effect
7 - Using Sound Pads
Recording sounds and assigning them to
Sound Pads
Sound Pad audio sources can be recorded by this unit.
(The stereo mix of the unit is recorded.)
As an example, here we explain the procedure for recording and adding
a sound to Pad 1 of Bank 1.
1. Load an SD card.
2. Adjust the faders and other controls so you can hear the sound mix
that you want to record to the pad.
3. Open the PAD Settings page of the Sound Pad Screen and activate
Bank 1.
Applause Alarm
Drumbeat Heartbeat
Sound Pad Screen PAD Settings page
4. When the Bank 1 screen is open, tap Pad 1.
Sound Pad Screen PAD Settings page
o The desired color can be set.
o As necessary, select the Play Method on the Sound Pad Screen to
set how it plays back.
5. Next, tap "PAD Rec" to show the pad recording control.
Sound Pad Screen PAD Settings page
AirHorn Brass
Bleep Effect
25
TASCAM Mixcast 4