Adding Effect Sounds While Recording; Adding Marks While Recording; Playing Recordings - Tascam Mixcast 4 Reference Manual

5 - Recording and Playback

Adding effect sounds while recording

Effect sounds and BGM assigned to Sound Pads can be added while
recording.
1. On the Home Screen, use the and icons to switch banks to open
the one with the Sound Pads that have the necessary sounds.
Applause Alarm
Drumbeat Heartbeat
Home Screen (switching banks)
2. After switching banks, press Sound Pads (w) to play the sounds
assigned to them.
NOTE
i Playing effect sounds and BGM while recording will cause those
sounds to also be recorded.
i The bank cannot be changed while recording. Switch to the neces-
sary bank before beginning recording.

Adding marks while recording

Press the MARK button (8) while recording at positions where events
occur to add marks at those points.
This is useful to check content if you want to change it after recording.
The necessary points can be found quickly when editing recorded con-
tent in the dedicated software or to overwrite it on the Advanced Screen
opened from the PLAY Screen.
Added marks can be checked on the Advanced Screen during playback.
(See "Checking added marks on the Advanced Screen" on page 20.)
NOTE
The maximum number of marks that can be added to a single pod-
cast is 99.
18
TASCAM Mixcast 4
AirHorn Brass
Bleep Effect

Playing recordings

This unit can play podcasts recorded on it.
1. Tap the menu icon on the Home Screen to open the Menu
Screen.
Applause Alarm
Drumbeat Heartbeat
Home Screen
2. Tap the
play icon.
Menu Screen
This opens the podcast PLAY Screen.
3. Tap the podcast you want to play to select it.
PODCAST_001 : 2021/4/1
PODCAST_002 : 2021/4/1
PODCAST_003
PLAY Screen
The selected podcast will be highlighted.
4. Tap the 7 play icon to start playback.
Press the MARK button (8) while it is lit to add a mark at that point.
(See "Adding marks during playback" on page 19.)
AirHorn Brass
Bleep Effect
: 2021/4/1