Operating Individual Effects [Manual/Edit Mode] - Korg A5 Owner's Manual

Performance signal processor
Hide thumbs Also See for A5:
Table of Contents

Advertisement

The A5
'
effect system Is constructed of five basic effects that are connected in a row, as in the diagram below. Each individual
GUITAR
S
effect can be edited and combined with other effects to create an effect program. Each of the five effects in a program can be
independently turned on and off.
1 Press the Mode Select Switch to enter the Manual/Edit
mode. The mode LED above the Mode Select Switch lights up
to MANUAL/EDIT and the Bank/Value Display changes to
indicate that the machine is on Edit stand - by.
In the Manual/Edit mode, the EFCT/PROG switches (along
with the EFCT/PROG LEDs) control ON/OFF of each of the
five effects. When entering the Manual/Edit mode the
EFCT/PROG LEDs light up to display the effects which are
currently turned on. For example the figure below shows that
the Manual/Edit mode is selected after selecting METAL 1" in
the Program mode.
"METAL 1 " consists of three effects: DIST/OD, 3 BAND EQ
and REV/DEL.
See
www.hgroenewegen.tmfweb.nl
OPERATING INDIVIDUAL EFFECTS
[MANUAL/EDIT MODE]
for more
20 sept. 2003
2 Press the EFCT/PROG switches to toggle the effects on
and off. For example pressing the EFCT/PROG switch
immediately under (1) COMPRESSOR turns on the
Compressor effect.
3 Press the EFCT/PROG switches once again to turn off the
effect. Try different effect combinations to hear sound
variations.
4 To select and hear individual effects in another program,
you must return to the Program mode once. Press the Mode
switch to switch back to the Program mode. The Mode LEDs,
the EFCT/PROG LEDs and the Bank/Value Display return to
their Program mode indication. (Now select a new program
and press the Mode switch again to return to the Manual/Edit
mode.)
Indicates the bank number when switching to the Program
mode.
5
Pg

Advertisement

Table of Contents
loading

Table of Contents