Names And Functions Of Controls And Terminals - Korg A5 Owner's Manual

NAMES AND FUNCTIONS OF CONTROLS AND TERMINALS

FRONT PANEL
Input Level
This controls the volume of Input
signal received from the input jack
Peak Indicator
For visual monitoring of the Input level while making
adjustments. Adjust the input level so that the Peak
Indicator occasionally but not constantly lights up.
Bank/Effect Selector
This Sliding switch is used to select banks while the
A5 GUITAR is in the Program mode (page 4) or
select the effects to be edited while in the edit mode.
Bank number
Effect names
EFCT/PROG LED
Theses LED's light up in red to show the chosen program number
while in the Program mode ( page 4). While in the Edit mode (page 6)
these LED's light up in red to show the effects that are turned ON.
Parameter Editor
The value of each effect parameter can be changed by rotating this
control in the Edit mode (page 6).
REAR PANEL
VOLUME Pedal Jack
For connection to the outpul jack of optional volume pedal KORG
KVP - 001 (When using a KVP - 001 set its minimum volume at 0).
PHONES jack
This jack is for stereo monitoring
ot the A5 GUITAR output.
See www.hgroenewegen.tmfweb.nl
Output Level
This controls the volume of the output signal.
Write Key
This executes saving of edited data.
Bank/Value Display
This Indicates the A5 GUITAR 's bank
number while in the Program mode
(page 4) or the value of parameters
while in the Edit mode (page 8).
Effect names
EFCT/PROG Switches
These switches are used to select the program number while in the
Progaram mode (page 1) or to toggle the individual effects ON/OFF
while in the Edit mode (page 6).
OUTPUT Jacks (R L/MONO)
These jacks provide stereo output for amplifiers, mixers etc. The
L/MONO jack when used alone provides mixed output for monaural
equipment.
INPUT jack
For connecting the guitar.
for more 20 sept. 2003
Bypass Key
Pressing this key toggles the bypass function
ON/OFF. While the bypass is ON The A5 GUITAR
sends unprocessed sound to the output terminal.
Mode Led
These LED's light up in red to show the
chosen mode: Program mode or Edit mode.
Mode Select Switch
This switch toggles between the Program mode and the Edit mode.
POWER switch
This switch turns the A5 on and off. Allways make sure that this
switch is at the OFF position before connecting or disconnecting the
AC adaptor either to the A5 GUITAR or an electrical outlet.
Mode List
DC 9V Jack
This Jack is for the
9 - volt AC adaptor.
2
Pg