Disk Functions; Load; Load All - Korg i40M User Manual

Reference • Disk/Global mode
Page 1: DISK functions
In this page you can select one of the three disk func-
tions: loading (LOAD), saving (SAVE) and utility
(UTIL). Move the cursor to the desired function, then
press ENTER/YES to access its subpages.
Load from disk Save on disk

1. Load

The Load function allows you to load data from disk.
You can load all the data that can fit in memory (Load
All), only some data (Load One), only Global data
(Load Global), or only the Keyboard Sets (Load Kbset).
Choose one of the three options and press ENTER/
YES to access the relative subpage.
Warning: Loading data can cause erasure of data pre-
viously existing in memory. Before loading new data,
make sure that you have a copy on disk of any important
data in memory.
Load
(ALL) (ONE) (GLOBAL)
Load all items
Load only one
item
128
Utility
Load Keyboard Set
(KBSET)
Load Global

1-1. Load all

The Load All function loads all data of a file, or all data
of a particular type contained in a file.
1. Press DISK/GLOBAL.
2. Select LOAD and press ENTER/YES.
Load
(ALL) (ONE) (GLOBAL)
3. Select ALL and press ENTER/YES.
All data All arrange-
ments
4. Select one of the options and press ENTER/YES to
view the contents of the disk. Only the data that
can be loaded with the selected function will be dis-
played.
ALL
An ALL file contains all the data that can fit in mem-
ory. In reality, it is a file that points to other files, which
can even be loaded separately. The ALL files allow you
to load all the data you may need for an entire concert,
in one operation. This operation loads also the Global
data, including the user scales and the two USER
drum kits.
1. Insert the disk.
2. Choose ALL and press ENTER/YES. The ALL file-
names contained on disk will appear in the display.
The filename extension will not appear.
(KBSET)
All programs All backing
sequences