Siemens SIMATIC NET S7-300 Manual page 311

F Document History
This section provides an overview of the previous releases of this manual and the
functional expansions in STEP 7 and NCM S7.
New in release 06 / STEP7 V5.4 SP1 (C79000 - G8976 - C182 - 06)
Apart from various adaptations to the currently available devices and the current
version of STEP 7/NCM S7 V5.4 SP1, the following modifications were included:
S Configuration of the CP mode PROFINET IO device
Depending on the device type certain CPs can be configured and operated in
the PROFINET IO controller or PROFINET IO device modes.
S Corrections and additions to the block description
Corrections and additions have been made to the following FCs/FBs.
- FC11 PNIO_SEND
- FC12 PNIO_RECV
These FCs are now also used for the PROFINET IO device mode of the
CP 343-1 Lean.
New in release 05 / STEP7 V5.4 (C79000 - G8976 - C182 - 05)
Apart from various adaptations to the currently supplied devices and the current
version of STEP 7/NCM S7 V5.4, the following features were included:
S New blocks for user programs
- There is a new block FB90 PN_InOut_Fast (previously known as: PN_IO_X)
available for PROFINET CBA.
S Corrections and additions to the block description
Corrections or additions have been made to the following FCs/FBs.
- FB88 PN_InOut / FB90 PN_InOut_Fast
- FB55 IP_CONFIG
- FC11 PNIO_SEND
- FC 12 PNIO_RECV
New in release 04 / STEP7 V5.3 SP3 (C79000 - G8976 - C182 - 03)
Apart from various adaptations to the currently supplied devices and the current
version of STEP 7/NCM S7 V5.4, the following features were included:
S New blocks for user programs
- There is a new block FB90 PN_IO_X available for PROFINET CBA.
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
A -311