Table of Contents
Advertisement
4 Configuration and Settings
4.3 Configuring time-of-day synchronization from LOGO! CMR via NTP server
No.
5.
In "Actions" you specify what exactly should happen in the event of a signal change
(e.g. LOGO! should switch to "STOP" or an SMS should be sent).
6.
To complete the configuration for monitoring the signals or process values of LOGO! 8 with the
LOGO! CMR, all possible "Events" defined for the signals of LOGO! 8 need to be linked with the
"Action" to be performed in "Assignments".
4.3
Configuring time-of-day synchronization from LOGO!
CMR via NTP server
LOGO! CMR enables synchronizing the time of day using different methods (GPS,
GSM, NTP server) and forwarding it to LOGO! 8.
The correct UTC time is therefore always set in LOGO! which is very important in
applications where a timer, for example, is used.
In this application example it is ensured by the time-of-day synchronization that
street lighting is controlled at the right time of day via the astronomical clock.
Note
In the completed configuration file for LOGO! CMR, also offered in this
application example for download, the settings for the time-of-day
synchronization of LOGO! CMR via NTP server have already been made.
Further information, on how to load the completed configuration file into LOGO!
CMR is available in Chapter 5.3.2.
The NTP server used in this example is a free to use NTP server. Siemens
does not provide this service.
Alternatively, another NTP server can also be used.
If necessary, check the respective license terms of the NTP server for your
application purpose.
The tables below describe the settings to be made in the web interface (WBM) of LOGO! CMR
to enable sending or receiving an SMS with LOGO! CMR.
LOGO! Set 1
Entry ID: 109063024,
V1.0,
07/2015
Action
15
Hide quick links:
Advertisement
Table of Contents
