4 Configuration and Settings
4.2 Monitoring of signals/process values of LOGO! 8 with LOGO! CMR
No.
2.
In "Message texts" you can enter possible SMS message texts.
3.
All signals of LOGO! 8 to be changed or monitored via SMS, need to be entered at "Signal
definitions".
Note:
Please ensure that analog values from LOGO! 8, to be monitored or changed with LOGO! CMR
must previously be entered in LOGO! Soft Comfort V8 at "Tools > Parameter VM Mapping" (e.g.
the output of an analog MUX). For digital values, this rule does not apply.
4.
In "Events", the type of signal change must be defined for which something shall happen (e.g. a
value exceeds a certain limit or a bit changes to 1).
LOGO! Set 1
Entry ID: 109063024,
V1.0,
07/2015
Action
14