Table of Contents
Advertisement
Initial Feature Assignments for Non-attendant Voice Terminals
with 1030 or 3070 Configuration in Standard Square Systems
10-Button
5-Button
The system automatically assigns your
*
first eight lines to positions above the dial
pad. If you have fewer than eight lines,
the feature shown on the left of each of
these buttons is assigned.
†
If you have more than eight lines, you
must assign them to the buttons to the
right of the dial pad. The numbers in the
lower right-hand corner of each button in-
dicate the order in which lines are
assigned. If you don't use a button for a
line, you can program a feature on the
button.
34-Button
19
Advertisement
Table of Contents
