Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Type
Jumper
Description
CLR_CMOS 3-pin
CLEAR CMOS
BIOS_WP 3-pin
BIOS PROTECT
Installing the Motherboard
Setting (default)
1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the
CMOS, make sure to
turn off the system.
1-2: DISABLE
2-3: ENABLE
9
CLR_CMOS
1
BIOS_WP
1