Radio Operation - Boss Audio Systems BV9700 User Manual

SETUP
changed. In PBC OFF mode, use
numeric buttons to input time and
confirm with OK/ENT button.
Stereo
3)
Item: Audio
Function: Display the current audio
mode; it can switch to other audio
mode.
Method: /
button.
Normal
4)
Item: Sound
Function: Display the current sound
mode; it can switch between normal
and 3D surround effect mode.
Method: /
Multi-subtitle language function (For
DVD only)
Press SUBT during playback.
Each time the button is pressed, the
subtitle language changes in sequential
order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language are
recorded, will be displayed at screen
left top corner.
Multi-angle function (For DVD only)
Press ANG during playback.
Each time the button is pressed, the angle
changes in sequential order.
Notes:
- The angle number is different according
to the disc.
- The function only works for discs having
scenes recorded at different angles.
- When no different angle is recorded,
will be displayed at screen left top
corner.

RADIO OPERATION

• Switching to radio mode
Press MODE button on remote control
to select radio mode.
In radio mode, the following information
will appear on the display.
buttons or press AUD
buttons.
• Selecting the frequency band
Press BAND on remote control to select
desired band. The reception band will
change in the following order:
FM1 FM2
• Selecting station
During radio mode, press CH
on remote control or
panel to increase frequency, press CH
button on remote control or
front panel to decrease frequency by
one step of channel spacing. Hold the
button longer for fast tuning. The
frequency is updated correspondingly
on display.
• Setting memory
Press RADIO PRESET buttons (1~6)
on remote control or press
front panel to preset stations at radio
mode. With this system, a total of 24
stations can be stored in the memory
of six buttons. Each band stores up to
six preset stations.
The stations might be FM1, FM2, FM3,
AM band. The operation is as below:
- Store in Memory
Press and hold desired memory
location button for several seconds.
The current listening station will be
stored into the number button.
- Retrieve a Preset Station
Press any one of the RADIO PRESET
buttons (1~6) on remote control to
retrieve a station which had been
stored in the memory in advance the
chosen number is shown on display.
• Automatic memory storing & program
scanning
- Program scanning
Shortly press AS/PS button on remote
control or on the front panel to scan
preset station.
26
FM3 AM
button
on the front
on the
/ on the