Operation; Basic Operation - Boss Audio Systems BV9700 User Manual

OPERATION

BASIC OPERATION

Turning the player on/off
Press and hold button on the front panel
for several seconds or press
remote control to turn the player on or
off.(Note: Shortly press
front panel will return the previous menu.)
Open/Close the Monitor and Angle
Adjustment
• Press button on the front panel or
point the remote control to the remote
sensor on the front panel and press
OP/CL button on the remote control,
the monitor will draw out automatically.
OPEN/CLOSE button
When the monitor draws out to a certain
location, it will turn upward automatically
and stop at vertical position.
• Adjusting the viewing angle and
distance. (1)Method A: When the
monitor stops moving, press SETUP
button on the front panel the following
picture will appear on the screen display.
Press SETUP on the front panel to select
Angle or Slide items. Then use +/- buttons
on the front panel to turn the monitor
on the
button on the
16
angel upward/downward in small steps
or
draw the panel in/out to get a desired
viewing position.
(2)Method B:
You can enter the panel setup menu by
pressing MENU button on the remote
control, then select SETUP, in Setup
menu you can select the Panel item to
enter the panel setup menu. Press
buttons on the remote control to select
Angle or Slide items. Then use /
buttons on the remote control to turn the
monitor angle upward/ downward in small
steps or draw the panel in/out to get a
desired viewing position.
And you can rotate the monitor left and
right from the central viewing position at
a certain angle range manually. (Note: Do
not rotate the monitor forcibly to avoid
mechanical damage.)
• Return the monitor to the central viewing
position, then press
front panel or press OP/CL button on
the remote control, the monitor will turn
downward automatically.
When the monitor turns downward to
a certain angle, it will draw in.
/
button on the