Boss Audio Systems BV9700 User Manual page 17

OPERATION
Remote Sensor
There is a remote sensor on the front
panel. You can point the remote control
handset to the remote sensor on the front
panel and press function keys on the
remote control to control the DVD unit.
The unit is also connected to an external
remote receiver (See the electrical
connection diagram above), and the
function is the same with the remote
sensor on the front panel.
Notes:
7" TFT Display
When the monitor stretches out, the 7"
color TFT display can show the current
state of the unit.
Volume Level Adjustment
Press VOL+/- buttons on the remote
control to increase or decrease the volume
level.
Press MUT on the front panel or MUTE
on the remote control will mute the sound.
Press MUT or MUTE again the sound will
resume.
Mode Selection
Press MODE button on the remote control
to select among RADIO, DVD, TV, AV1,AV2
and RGB mode.
Reset
Press on the front panel to release the
front panel you will see the Reset button
(See THE PLAYER picture above.) It must
be activated with either a ballpoint pen
or thin metal object. The reset button is
to be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Picture mode Adjustment
Press MENU button on the front panel or
on the remote control to open the setup
menu, select Setup, in SETUP menu
select Picture, the picture menu will show
on the display, use
among Bright, Contrast, Color, Tint (For
the unit with NTSC system) and Mode.
/ button to select
Press / buttons on the front panel or
on the remote control to adjust the
selected item. The corresponding value
will show on the display.
In Mode item, you can change the zoom
among: Zoom1, Zoom2, Zoom3, Full(16:9)
and Normal(4:3).
Menu Setup on Screen Display
Press the MENU button and the following
menu will appear on the screen. You can
use
/ , /
between the highlight bars in the menu.
Then use ENT button on the front panel
or OK on the remote control to enter the
Audio or Setup menu as follow:
•Audio Menu:
In Bal/Fad menu, use / , / cursor
buttons to adjust the Balance and the
Volume level of the front&rear speakers.
17
cursor buttons to move