Samsung MH020FPEA Service Manual page 72

No Parts
2) Disassemble the Bracket Outlet Sub that
3) Disassemble the Drain Cushion from the
✳ The Evaporator should be disassembled
3 Evaporator
1) Disassemble the Cover Pipe that fixes
2) Disassemble the refrigerant temperature
Samsung Electronics
Procedure
fixes the Drain Pan equipped on the front
of the set.
– Unscrew 6 screws
set.
after disassembling the Cover Control
1-3) and the Drain Pan 2-1), 2-2), 2-3).
the high/low pressure Pipe.
– Unscrew 2 screws
sensor, Inlet air temperature sensor, and
EEV wire that connected to the inside of
PCB.
Disassembly and Reassembly
Remark
4-25