4-1-4 MH✳✳✳FDEA (Silhouette Duct)
No
Parts
1
Filter-Pre
1) Disassemble screws of indication part and
2) Turn the Plate Handle by hand when
3) When pulling the Filter-Pre handle,
✳ Be sure to remove the cushion on the
1) After disassembling places indicating screws,
2
Blower
&
Duct
Samsung Electronics
Procedure
then assemble the direction of
2 Plate-Handle places by use of screw
as shown in 2).
removing the Filter-Pre.
the Filter-Pre can be assembled.
marked part after initial installation.
(It cause the damage of noise).
detach Ass'y Cover Bottom.
Disassembly and Reassembly
Remark
4-17